Frac Initiator Sleeve FIS - 4-1/2" (114) ZHB 200.01.00.000
Characteristics
| No. | Parameter | Value |
| 1 | Casing string rated diameter, in (mm) | 4-1/2 (114) |
| 2 | Sleeve OD over body, in (mm) | 5.039 (128) |
| 3 | Sleeve ID, in (mm) | 3.898±0.035 (99±0.9) |
| 4 | Length of sleeve, ft (mm) | 2.133 (650) |
| 5 | Connecting thread, street elbow | Trapezoidal thread ОТТМ 114 GOST 632-80 |
| 6 | Sleeve port opening pressure difference, psi (MPa): ZHB 200.01.00.000 ZHB 200.01.00.000-01 ZHB 200.01.00.000-02 ZHB 200.01.00.000-03 ZHB 200.01.00.000-04 ZHB 200.01.00.000-05 ZHB 200.01.00.000-06 ZHB 200.01.00.000-07 |
2,132±213.2 (14.7±1.47) 2,842±213.2 (19.6±1.47) 3,553±284.3 (24.5±1.96) 4,263±284.3 (29.4±1.96) 4,974±284.3 (34.3±1.96) 5,684±284.3 (39.2±1.96) 6,395±284.3 (44.1±1.96) 7,105±284.3 (49.0±1.96) |
| 7 | Maximum pressure difference on sleeve, MPa (kgf/cm2) | 49.0 (500) |
| 8 | Maximum injection rate, gal/min (m3/min) | 1,189 (4.5) |
| 9 | Maximum tension load allowed, lbf (kgf) | 143,325 (65,000) |
| 10 | Weight, lb (kg) | 42.116 (19.1) |
| 11 | Maximum operating temperature, °F (°С) | 212 (100) |