Frac Sleeve FS LCSB- 4" (102) ZHB 100.21.00.000
Description
Designed for setting of five soluble balls to activate frac initiator sleeve and to perform fracturing job when carrying out injection of cemented and non-cemented horizontal boreholes in multi-layer formations in the open hole of at least 4-3/4 in (121 mm) diameter.
Characteristics
| No. | Parameter | Value |
| 1 | Casing string rated diameter, in (mm) | 4 (102) |
| 2 | Sleeve OD over body, in (mm), maximum | 4.528 (115) |
| 3 | Length of sleeve, ft (mm) | 0.983 (300) |
| 4 | Drift diameter of ball seat openings, in (mm) | 0.630 (16) |
| 5 | Number of openings, ea | 5 |
| 6 | Total area of openings, in² (cm²) | 1.55 (10) |
| 7 | Ball seat material | D16.Т GOST 21488 |
| 8 | Ball diameter, in (mm) | 0.866 (22) |
| 9 | Connecting thread, street elbow | trapezoidal thread ОТТМ 102 TU 14-161-163-96 |
| 10 | Maximum pressure difference on sleeve after ball setting, psi (MPa) | 4,974 (34.3) |
| 11 | Maximum tension load allowed, lbf (kgf) | 143,325 (65,000) |
| 12 | Weight, lb (kg) | 16.758 (7.6) |
| 13 | Maximum operating temperature, °F (°С) | 302 (150) |